We're offline for a tune-up, we'll be up and running smoothly very soon. In the meantime, here are some other options available: Visit an  Sign up for View us on Social Media We appreciate your patience – for your next visit: 15% offyour next purchase. Enter coupon code: in shopping cart. We look forward to serving you, We're offline for a tune-up, we'll be up and running smoothly very soon. In the meantime, here are some other options available: Visit an Sign up for View us on Social Media We appreciate your patience – for your next visit: 15% offyour next purchase. Enter coupon code: in shopping cart. We look forward to serving you, Chevrolet Impala Tail Light Bulbs Replacement Guide
Owners of other similar W-Body or "W" platform vehicles such as the Lumina, Monte Carlo, Buick Regal, Century, LaCrosse, Allure, Pontiac Grand Prix, and Oldsmobile Cutlass Supreme may also find this guide to be useful. The tail light assembly of a Chevy Impala contains the following bulbs with their respective part numbers: brake / stop light bulb # 3057, reverse / back up light bulb # 921, and tail light bulb # 168. Some Impala models are equipped with a rear side marker bulb which is part # 194. The only tool needed to replace any of the tail light bulbs is a flathead screwdriver. Plastic Screw Removed Pull Back Plastic Cover Trunk Trim Piece Removed The first step is to open the trunk and move to the side of the car with the burnt out light bulb. Remove the round black plastic screw on the plastic trunk trim piece with a flathead screwdriver and pull it back. To make things easier, you can also remove the other plastic screw on the opposite side and pull off the entire black plastic trunk trim piece. Remove Thumb Screw Peel Back Trunk Carpet 2nd Thumb Screw Removed Then unscrew the first black plastic thumb screw that has hooks for holding up the mesh cargo net. Turn it counter clockwise until it comes off and pull away the grey trunk carpet. Behind the trunk carpeting, you'll find the other two black plastic thumb screws that need to be removed. 3rd Thumb Screw Thumb Screws Removed If it doesn't come off easily, try tapping on the exposed bodies of the screws in the trunk while wiggling the tail light assembly. Pull Off Tail Light Turn Upside Down 1/4 Turn Counter Clockwise Turn the tail light assembly upside down and rest it on the bumper. It would be a good idea to put a towel underneath the tail light to protect the paint on the bumper. To remove any of the three (or four) tail light bulbs, grasp the base of the bulb and rotate it 1/4 turn counter clockwise. Pull the socket and light bulb straight out of the assembly. Pull Bulb Straight Out Push New Bulb In 1/4 Turn Clockwise To Secure To remove any of the bulbs from their sockets, pull them straight out. If they don't come out easily, try gently wiggling the bulb while pulling upwards on it. Replace the burnt out bulb by pushing a new one into the socket. Insert the new bulb and socket back into the tail light assembly. The brake and rear turn signal is part number 3057.The reverse light bulb is part number 921. If you have a side marker light, the bulb part number is 194. Rotate it 1/4 turn clockwise to secure it in the assembly. Test the new bulbs by having someone
step on the brakes, activate the turn signals and put the car in reverse. Is the tail light and turn signal the same bulb?In many newer cars there is one light bulb per tail light. There are two filaments in each light bulb. One is for your brake light and one is for your turn signal.
How do you change a rear turn signal bulb?Before you begin - or if you have any questions about your specific vehicle - we always recommend taking a look at your service manual.. Step 1: Open trunk or tailgate. ... . Step 2: Pull tail lamp assembly out (if needed) ... . Step 3: Pull bulb out. ... . Step 4: Add bulb grease, put new bulb in. ... . Step 5: Reattach assembly (if needed). |
2009 chevy impala rear turn signal bulb replacement
Related Posts
Copyright © 2024 toptenid.com Inc.
