Mazda cx-5 check engine light codes

A check engine light can indicate a broad spectrum of problems with your 2013 Mazda CX-5. If you have a flashing check engine light, turn off the engine immediately to prevent potential motor damage. Whereas a steady check engine light may mean you merely need to tighten you gas cap next time you stop in order to reset the service engine soon light. The video above shows how to locate the on board diagnostics OBD plug location on your 2013 CX-5, how to read the trouble codes and how to reset or clear the check engine light using a scanner on your CX-5.

Is it OK to drive with a check engine light on? Intermittent Check Engine Light: If the check engine light on your 2013 CX-5 is not steady, try to take note of the conditions when this happens. For example, does it happen when you accelerating, driving on the highway or does it appear at low speeds? This will help your mechanic evaluate the issue. Steady Check Engine Light: If your check engine light is on every time you operate your CX-5, you need to have it checked as soon as possible, especially if you notice performance problems or unusual noises. Flashing Check Engine Light: If your check engine light is flashing, stop driving your CX-5 and have it towed to your nearest mechanic – a blinking check engine light means you probably have a very serious problem with your car and you risk ruining your engine by driving it. If you are unsure about what your diagnostic trouble codes mean after finding the CX-5 OBD port location and scanning the codes; have your CX-5 diagnosed by a professional automotive technician.

Mazda cx-5 check engine light codes

The “check engine” dashboard warning light is dreaded by drivers of all sorts of vehicle makes and models. Not only is it a sign that something might be wrong with your vehicle, but the vague warning is also something that can be frustrating for you to diagnose yourself. While we can’t speak for all vehicles, we can speak for our Mazda models. In order to put your mind at ease, or at least help you consider some potential causes, we’ve put together some of the common reasons why the Mazda check engine light is on in some vehicles.

The list below presents a few of the commons causes for check engine lights being on, though it is certainly not a complete list. If you’re handy, you can consider some of the problems down below and attempt to diagnose the vehicle yourself. That said, we do recommend that you visit a Mazda service team as soon as possible once the check engine warning light illuminates.

Get your check engine light problems diagnosed at Capistrano Mazda

Common Causes of the Mazda Check Engine Light Turning On

  1. Mazda cx-5 check engine light codes
    Loose fuel cap:
    Before you start looking through all sorts of vehicle components, first check out the gas cap. A loose fuel cap can sometimes cause the check engine light to turn on. This could also be the case if the gas cap is not the right one for your Mazda.
  2. Low fuel: If you get the check engine light while at the same time going low on fuel, it’s possible that the light illuminated because of the low fuel level, so be sure to refill as soon as possible.
  3. Ignition coils or spark plugs: Electrical problems can often be a cause of the check engine light, which is a more complicated fix than the ones above. Some things that might need checking up on include ignition coils, spark plugs or spark plug wires.
  4. Emissions: Issues with components of the vehicle’s emissions control system, like the catalytic converter, could be a potential problem.
  5. Thermostat: Your vehicle does have a thermostat, which helps regulate the engine’s temperature. If there is a problem with it or if there is no coolant in the vehicle, it may be something to check out.
  6. Mass airflow sensor: Problems with the mass airflow sensor, which helps monitor air flow into the engine, can be a typical cause of the check engine light coming on.

Get more helpful Mazda tips on the Capistrano Mazda blog

Although you now know some of the possible reasons why your Mazda check engine light is on, the best thing to do is to let a service team who knows Mazda diagnose the problem. You can schedule an appointment here at Capistrano Mazda right through our website or contact us with any questions you have. If you’re going to be driving your vehicle to the dealership, remember to drive safe and avoid driving at high speeds until it gets fixed.

What is the most common cause of check engine light?

The emissions/exhaust system is the most likely culprit for many check engine lights being illuminated. There could be an exhaust leak or a problem with the catalytic converter. The mass airflow sensor (MAF) is another sensor that is easily tripped or can fail.

What does check engine light mean Mazda CX 5?

If your new Mazda CX-5 or Mazda3 check engine light goes on, there are a few different vehicle issues that may cause this. Possibilities include: There is a problem with the engine's electrical system. There is a problem with the emission control system. The fuel tank is empty or extremely low.

What codes cause check engine light?

The most common diagnostic codes for check engine lights are:.
Codes: P0171 – P0175 → Deals with sensing your oxygen levels. ... .
Codes: P0300 – P0305 → Deal with engine misfires. ... .
Codes: P0411, P0440, P0442, P0446, P0455 → Deal with the evaporative system. ... .
Code: P0401→ Deal with exhaust gas recirculation..