Mazda 3 cold air intake hp gain

Finally a performance intake system worthy of your Mazda! The Burger Motorsports intake replaces your entire intake system with a higher flowing intake optimized for performance. The heart of this change is the BMS renewable inverted cone filter capable of supporting over 500+whp. In addition, the flattened factory turbo inlet tube is replaced with a higher flowing aluminum pipe. To ensure optimal airmass calculations we include a billet CNC machined MAF housing. And finally, an integrated heat shield and mounting bracket tie everything in place. The BMS intake is powder-coated black and will last the life of your vehicle.

The BMS intake is offered in two stages. Stage1 mounts the filter in the engine bay where the factory airbox was and is the simplest install with the highest level of induction sound. For those who want even colder air, Stage2 extends the filter down to the fender for a true cold air intake system. Installing the second stage does not require the removal of the bumper!

Power gains are up to 15whp peak on the factory tuning with 30whp+ gained in areas under the curve up top.

In addition to a dramatic power improvement, sound, and turbo response are both greatly improved. This is how your Mazda should have come from the factory! We suggest cleaning the filter every 15-20k miles using an S&B cleaning kit.

Since its introduction in 2004, the Mazda 3 has been a sporty and stylish choice for economically-minded drivers around the world. Available as both a sedan and a hatchback, the Mazda 3 offers a vehicle recognized for its design, performance and handling. The drivability and functional styling of the Mazda 3 have also made it a popular choice for motor enthusiasts, tuners and customizers.

AEM is one manufacturer that has developed quality aftermarket performance intake systems for both the 1st and 2nd generations of the Mazda 3. Boasting superior performance, a washable and reusable air filter, and a lifetime limited warranty, AEM induction systems offer a perfect upgrade to improve long lasting performance for your Mazda 3.

Manufactured in the USA since their beginnings in 1987, AEM performance short ram and cold air intake systems are engineered to add horsepower and reduce restriction compared to OEM air intakes. AEM pioneered the cold air induction system for sport compact models in 1994 and has continued that tradition of improving vehicle performance, including that of the Mazda 3 ever since.

AEM has designed a high performance intake system for both engine sizes of the 1st generation Mazda 3. 2004 to 2008 Mazda 3 models with a 2.0L engine or a 2.3L engine can benefit from the AEM 21-488C intake system. This air intake system is also available in 4 different colors: 21-488C (Charcoal Grey), 21-488P (Polished Silver), 21-488R (Red), and 21-488B (Blue).

For 2010-2012 Mazda 3 2nd generation models with a manual transmission, AEM has released cold air intake parts 21-695C (Charcoal Grey) and 21-695P (Polished Silver finish). The 21-695C intake has been dyno tested showing an estimated 6.7HP gain at 6100 RPM.

AEM intake systems are designed to be complete bolt on upgrades for specific vehicle models and include a durable and easy to clean Dryflow® air filter. AEM's air filters do not use oil and are designed to increase horsepower and torque for vehicles like the Mazda 3.

AEM Dryflow air filters used on AEM air intakes can be used for up to 100,000 miles before cleaning is necessary depending on driving conditions. AEM air filters are designed to protect your engine from harmful dirt and particles while providing excellent filtration.

To find all AEM products for your Mazda 3 or any other vehicle, use the AEM application search function and the Where to Buy function on AEMIntakes.com to find an AEM dealer near you.

Bringing more air into the intake chamber, the intake system allows you to increase horsepower and torque for your Mazdaspeed. Each is designed to maintain optimal flow and generate ideal performance for your Mazda, with exacting tolerances and using the latest in computer-aided manufacturing techniques to bring you the highest quality and best-performing part for your money. You can expect to gain up to 30+ HP from this simple to install intake system.

Types of Air Intake systems

Short ram air intakes suck in large amounts of heated air within the engine to help in efficient combustion. These are short and wide pipes because it uses a shorter pipe than the cold air intake, it only has access to warm air near the engine. To make up for this, it sucks in more air than cold air intakes.

Cold air intakes are a type of ram air intake system that works by drawing in cool air from outside and into the Mazda’s engine. This type of intake often has minimal bends and has a long duct with access to cool air. With cooler air coursing through the engine, combustion requires less heat and fuel.

Why Replace Your Mazdaspeed or Mazda Air Intake System

More often than not, car enthusiasts and expert mechanics recommend that you purchase an air intake as soon as possible. Even vehicles of the latest makes and models benefit from an aftermarket air intake system. Below are five of the reasons why an air intake system can improve your Mazda engine’s performance.

Keep in mind, when an intake is paired with a cold air box or battery box, you create a great look for your engine bay and increase your overall Mazda performance. Also, when paired with fuel pump internals, you’ll be able to increase the efficiency, power and set yourself up for future modifications as well!

Why replace your intake system?

1. Increased Acceleration

With an upgraded intake, your Mazda can experience increased horsepower. Upgraded intakes can also increase your engine’s responsiveness when speedy acceleration is required. Because there is more air available and ready for combustion with aftermarket air intakes, your engine reaches the desired speed faster compared to the stock intake that comes with your Mazda. Those who enjoy racing, autocross, or drag strips with their Mazda or who if you just like quick acceleration as soon as the traffic light turns green, an aftermarket air intake can help you enjoy your get up and go a bit more.

2. Greater Fuel Economy

Engines rely on a mixture of fuel and air to create an explosion that powers your Mazdaspeed. When there is not enough air pumping through the engine, your Mazda consumes more gas to compensate for the lack of oxygen. Stock intakes that come with your Mazda are designed to be quiet instead of fuel efficient, and as a result, they tend to use more gasoline. Pumping in more air via an upgraded intake can reduce gas consumption and translate to savings on fuel expenses. For those who are concerned about fuel efficiency…we should note here: that the enhanced sound may cause you to have a heavier foot and decrease your fuel efficiency in exchange for spirited driving.

3. More Effective Filters

The stock air intakes that come with your Mazda normally have disposable paper filters to catch debris. While these filters do their job in trapping particles that may potentially wreak havoc on your engine, the filters eventually require replacement (often a great upsell item for your local technicians). Aftermarket intakes, on the other hand, are equipped with filters that typically have to be cleaned every 20,000 to 50,000 miles (just some soapy water and let it dry completely before reinstallation). This not only saves money but it also provides a more effective filtration method that not only keeps debris out but also lets a larger qty of air inside.

4. Enhanced Sound

Those who like the aggressive sound of a roaring Mazdaspeed engine should enjoy our upgraded intakes the most. Because more air enters through the intake to the engine, it produces a sound that our Mazda enthusiasts find thrilling.

5. Better Overall Performance

With the simple installation of an upgraded intake, you can increase the overall performance of your Mazda. Whether you decide to go for the short ram or the cold air intake, you increase your Mazda’s efficiency, speed, power, and sound.

Looking for an intake system or upgraded intake components to fit your Model? 

Shop Our Selection of Intakes By Model:

2010-2013 Mazdaspeed3

2007-2009 Mazdaspeed3

2006-2007 Mazdaspeed6

2014+ Mazda3

2010-2013 Mazda3

2004-2009 Mazda3

2014-2017 Mazda6

2009-2012 Mazda6

2003-2008 Mazda6

2016+ MX-5

2016+ CX-3

2013+ CX-5

Summary

Article Name

Intakes for Mazdas

Description

Ever wondered why to upgrade your Mazda air intake system? Here are some basics on why an intake will help with power and efficiency, and the steps to take to build your Mazdaspeed

How much extra HP does a cold air intake add?

Do cold air intakes make HP?

Which cold air intake produces most HP?

How much power do cold air intakes make?