2015 toyota highlander maintenance required light meaning

Q: What does it mean when maintenance required light is on Toyota?

What MAINT REQD Means. The MAINT REQD light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

Every vehicle has its own style, even when it comes down to the details, like dashboard lights. It can be difficult to know what each light means and what to do when one goes on. Some lights are minor warnings, while others are serious and cannot be ignored. Today we’re going to help you get to know your Toyota warning lights by answering the questions, “What does it mean when the maintenance light is blinking in my Corolla?”.

What does the maintenance required light mean?

Toyota vehicles have one dashboard light that other automotive brands don’t have and that’s the maintenance required light (MAINT REQD). Many first time Toyota drivers might confuse this light with the check engine light, but it is actual a different warning altogether. The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule.

Read More: Tips and Tricks

The light illuminates for about 3 seconds and then flashes for about 15 second every 4,500 miles after the maintenance has been reset. Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.

How to Reset Maintenance Data on Toyota Corolla

Resetting your maintenance data is fairly simple. After the required maintenance is performed according

to the maintenance schedule follow these steps:
1. Turn the “ENGINE START STOP” switch or engine switch off with the trip meter A reading shown,
2. While pressing the trip meter reset button turn the “ENGINE START STOP” switch or engine switch ON.
3. Continue to press and hold the button until the trip meter displays 000000.

Taking care of your Toyota vehicle is simple when you know what each warning light means. If you ever have any questions you about whether your vehicle needs any kind of maintenance don’t hesitate and call the service department here at Toyota Palo Alto. Our friendly staff will be able to help you figure out what’s going on with your vehicle and whether it’s time to make a service appointment.

More From Toyota Palo Alto

Comstock/Comstock/Getty Images

Many Toyota Highlander models are equipped with maintenance reminder systems that alert the driver when regular maintenance should be done. Oil changes are the most common reason for the maintenance reminder to illuminate. When the oil is changed by a Toyota dealer, the light should get reset as part of the process. You can reset the maintenance required light yourself if your mechanic does not reset it or if you perform the maintenance yourself.

Step 1

Turn the ignition switch to the "On" position but do not crank the engine.

Step 2

Press the odometer button until the total mileage shows on the display.

Step 3

Turn the ignition switch off.

Step 4

Press and hold the odometer button. Turn the ignition on again.

Step 5

Release the odometer button when the maintenance required light blinks a few times then disappears.

References

"2010 Highlander Owner's Manual"; Toyota Motor Sales, USA, Inc.; 2009

Writer Bio

David Clair began writing for websites in 2001, creating online marketing content for business owners. He has written for Internet companies including eBay and creates training materials for an online education company. Clair is studying technical writing and pursuing an Associate of Arts in information technology from the University of Phoenix.

Your Toyota maintenance lights are not just there for decoration; the manufacturer put them there for a distinct purpose. Understanding the MAINT REQD meaning, as well as the other maintenance lights, and when you need to seek help, could not only keep you safe but it will prevent severe damage to your car as well.

ABS

The ABS light could indicate a malfunction in the vehicle’s Antilock Braking system or the Brake Assist System.

Battery Icon

The battery icon, or charging system warning light, indicates a malfunction in the vehicle’s charging system which will cause the vehicle to lose power and could damage the vehicle’s battery.

Cruise Control Indicator

This icon resembles a speedometer with an arrow pointed towards the speed gauge. It simply indicates that the cruise control in your vehicle has been activated.

EPS

The EPS warning light indicated there’s a problem with your vehicle’s electronic power steering system. This fault could cause you to lose control of the vehicle while driving.

Headlight Indicator

The headlight indicator shows that the vehicle’s parking, tail, license plate, side marker, instrument panel, and headlights have been turned on

High Beam Indicator

The high-beam indicator icon indicates that your vehicle’s high-beam headlights have been turned on

Engine Oil Indicator

This icon indicates a lack of oil pressure in the vehicle, which should be addressed immediately with an oil change to prevent severe damage to the engine and moving parts.

Fuel Level

The low fuel warning light indicates a lack of fuel, which can be remedied at the nearest service station.

Washer Fluid Low Warning Light

This icon indicates that the vehicle’s windshield washer fluid level is low refill it to ensure a safer Boulder City area drive.

MAINT REQD

The icon MAINT REQD meaning is important. When the MAINT REQD light goes on it indicates that the vehicle’s scheduled maintenance is due. This service may be covered under your ToyotaCare plan if your vehicle is less than two years old.

Security Indicator

The vehicle’s security system has been turned on or off.

Vehicles With Smart Key Systems:

This indicator flashes when the vehicle’s engine START/STOP switch has been turned off to show that the system is operating properly. The indicator stops flashing after the engine START/STOP switch has been turned to accessory or ignition on to show that the system has been canceled.

Vehicles Without A Smart Key System:

The indicator light will flash when the ignition key has been removed from the switch to show that the system is in operation. The light will stop flashing after the registered key has been placed back into the ignition to show that the system has been canceled.

Slip Indicator

This indicator will come on if the vehicle senses any of the drive wheels spinning. This light will indicate that the VSC/TRAC systems are in operation. If your vehicle is equipped with a buzzer, it may sound to indicate that the VSC is in operation

Airbag On/Off Indicator

Vehicles equipped with front passenger occupant classification systems will see this indicator change depending on the size and weight of the front passenger. When the system senses a small passenger who may be harmed by airbag deployment, the airbag indicator will show off. During all other normal activity, the indicator will show on.

SRS Warning Light

This indicator light could mean one of 3 things:

A malfunction in the SRS airbag system.
A malfunction in the front passenger occupant classification system.
A malfunction in the seat belt pretensioner system.

Tire Pressure Warning Light

This light indicates low tire inflation pressure that should be addressed immediately by increasing air pressure or replacing the tires. Learn more about the tire pressure monitoring system (TPMS) with Findlay Toyota.

TRAC OFF

This icon indicates the status of the vehicle’s traction control system. If you find your vehicle stuck in slippery mud or fresh snow, the TRAC and VSC could reduce power from the engine to the wheels. In this instance, you may need to turn off the system in order to rock the vehicle back and forth to free it.

Doing so is simple:

Push and release the switch quickly to turn off TRAC.
The TRAC OFF indicator light will come on.
When the vehicle is free quickly press the button again to turn the system back on.

Turn Signal Indicator

This icon indicates that the right or left turn signal has been activated, useful for busy Pahrump roadways.

VSC OFF Indicator

While the vehicle is stopped, push and hold the switch to turn off TRAC and VSC. The TRAC OFF and VSC OFF indicator lights should come on. To turn the system back on simply push and hold the switch again.

Schedule Your Vehicle Service Today

If you notice any of the Toyota maintenance lights coming on and staying on when they shouldn’t, need your Toyota maintenance lights reset, have questions about the MAINT REQD meaning, or if you have been having issues with your vehicle on your Mesquite drive or Moapa area commute, schedule a service appointment at Findlay Toyota and let us take care of it. Our team is also here to answer any questions you have about oil changes, how to check brake fluid, how often to change your engine air filter, what tire rotations are, how long an oil change takes, what does gap insurance cover, and more.

What does the maintenance required light mean on a Toyota Highlander?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle's maintenance schedule. Read More: Tips and Tricks. The light illuminates for about 3 seconds and then flashes for about 15 second every 4,500 miles after the maintenance has been reset.

How do you turn off the maintenance required light on a 2015 Toyota Highlander?

Resetting Maintenance Light on Toyota Highlander Quickly push and hold the odometer button on your dashboard, then turn your key to position two. Continue to hold the odometer buttonfor about 10 seconds. The maintenance light should start to flash, and you may hear a beeping sound. Then the light should go out.

What does it mean when maintenance required light is on Toyota?

What 'MAINT REQD' Means. The 'MAINT REQD' light comes on every 5000 miles from the last time it was reset. It in no way indicates any system malfunction; it is simply a mileage counter intended to remind the user that an oil change is necessary.

What can cause maintenance required light to come on?

Always remember that the maintenance required light will turn on when your car requires service. It normally reminds you every 5,000 miles to make an oil change, filter replacement, and inspection.