How to set up vizio universal remote

I have been keen on having a single remote controller for all devices in my main TV room and chose to program my VIZIO remote controller as my primary controller.

During the process of transition, I realized not a lot of folks realize they can also do the same and switch to a more convenient one-controller setup for most devices. For instance, you can configure your DVD player, supported TVs, Cable and satellite set-top boxes, etc. all to a single remote controller aka your VIZIO TV controller.

So this indulged me to write this in-depth setup guide on how to configure your VIZIO controller to do the same.

To program a VIZIO remote controller to other devices, you can use universal remote control codes. Simply enable the programming mode of the device and input the associated universal code to pair the remote with the device.

This article will explore the prerequisites to program a VIZIO remote controller and step-by-step instructions on how to program VIZIO remote controller using universal remote control codes.

Prerequisites to Programming VIZIO Remote Controller Using Universal Remote Control Codes

The VIZIO remote controller is programmed using Universal Remote Control Codes and follows the same protocols.

This is the key technology that can enable your VIZIO TV to control other devices that support the Universal Remote Control Codes.

Configuring the VIZIO remote controller is very similar to how you set up your VIZIO remote controller for your VIZIO TV for the first time.

But there are a few prerequisites that need to be taken care of before moving on to programming the codes onto your VIZIO remote controller.

These are just namesake prerequisites, but ensuring these will go a long way in making sure you get the best optimal experience with your devices.

Check the Model Number of the Remote Controller

Most VIZIO TV remotes are universal remote controllers that can be used to custom program the universal codes.

But there have been reports of some select remote controller models from VIZIO that has issues with the universal programming.

This might be a case of the functionality simply not working, or it can also be that VIZIO remote controller models are manufactured and programmed differently.

In the latter case, it might be a hardware lock that unfortunately cannot be bypassed.

But there are select models of the VIZIO TV lineup that are certain to not have this hard lock and therefore can be programmed by the user.

The remote controllers of VIZIO TV models that are certain to support programming in universal remote control codes are the VIZIO P, E, and M series.

So if you have the VIZIO TV models mentioned above, you are eligible to re-program your VIZIO remote controller with universal remote control codes.

If not, you can still try and check if the method works for you.

Power Cycle the Devices and VIZIO Remote Controller

A power cycle basically ensures that the device will work as intended without any hardware faults when executing commands.

A power cycle is basically a reboot for the hardware components of the device and remote controller and helps in balancing the internal charges.

There can be cases where the charge inside the system doesn't deplete completely, causing certain internal components to malfunction.

Power cycling can ensure that this misbehaving charge can completely deplete and the device charges up properly and evenly as intended for best results.

This can help in troubleshooting a lot of common issues faced with VIZIO devices too, like the infamous VIZIO TV not turning off and VIZIO TV cutting off edges bugs.

In order to perform a power cycle on your devices, do the following:

• Unplug the device from the power socket.
• Let the device sit idle powered off for a minute.
• During the minute wait, long press the buttons for a few seconds on the device to ensure the charges are entirely depleted.
• Plug the device back into the power socket.
• Let the device sit idle powered on for a minute.

This safe power cycles your devices.

In order to perform a power cycle on your VIZIO remote controller, do the following:

• Remove the batteries of the remote controller.
• Let the remote controller sit idle powered off for a minute.
• During the minute wait, long-press the buttons on the remote for a few seconds to ensure the charges are completely depleted.
• Check if the batteries have enough charge to power the remote controller. If note, replace and put the batteries into the remote controller.
• Let the remote controller sit idle powered on for a minute.

This safe power cycles your VIZIO remote controller.

How to Program VIZIO Remote Controller Using Universal Remote Control Codes

Now that we have got the prerequisites out of the way, we can move on to the meat and potatoes of the main question at hand.

VIZIO remote controllers, just like any other remote controller that supports universal remote control codes follow the same procedure for reprogramming.

Necessary Universal Remote Control Codes

Before initiating the programming process, it is imperative to keep the required universal remote control codes nearby so as to input them when required.

These codes are unique to every device brand, with some even having multiple lines of code.

The codes extend to a plethora of brands, so you might need to carefully look at the list and jot down the required codes to input.

The universal remote control codes of some of the more popular brands of TVs are listed below:

The universal remote control codes of some of the more popular brands of set-top boxes are listed below:

If the above lists don't have your device brand, or you want to program it to other devices such as a VCR, you can simply check out VIZIO's universal codes documents.

Programming the Universal Remote Control Codes

In order to program your VIZIO remote controller using universal remote control codes, follow the steps given below:

• Identify and turn on the device to control.
• Long press the power button on your device till the LEDs flash twice and stay lit.
• Using the number pad on your VIZIO remote, input the universal codes according to the device model.
• The LEDs should flash once each time you enter a digit, and once the system successfully recognizes the inputted code, the LED should flash twice and turn off.
• Simply point the remote at the device and try turning it off.
• If the device turns off, the programming process is a success.
• If the device does not turn off, use another code from the codes table and try again.

This programs your VIZIO remote with your peripheral devices.

Final Thoughts

If you still cant reprogram your VIZIO remote controller after following the above steps, it might be that your controller is incompatible.

Alternatively, you can also try contacting VIZIO customer support and seek help in a VIZIO remote controller replacement with universal control code support.

I hope my setup guide on how to program your VIZIO TV Remote to control various devices has been a great read and has aided you with the same.

Have a good day!

Frequently Asked Questions (FAQ)

Will a universal remote work with any TV?

A universal remote controller can be programmed to work with any TV, irrespective of the brand as long as it has an IR sensor to read inputs.

Does VIZIO ECO mode affect connection speeds with a universal remote?

VIZIO ECO mode is used to reduce power consumption by primarily controlling the features on the software side that might use a lot more power.

The basic functionalities, such as controlling the device with an IR or Universal remote are not affected by the ECO mode.

How many devices can be programmed to a VIZIO universal remote controller?

VIZIO universal remote controller can be programmed to control up to 3 devices at once, depending on the model of the controller.

You May Also Enjoy Reading

• Are Vizio TVs Good For Gaming? Explained!
• How to Get Regular Channels on Vizio TV [2022]
• Best Audio Settings for Vizio TV: Improve Audio Quality!
• Vizio TV Cuts Off Edges: How To Fix [2022]
• Vizio TV Color Problems: How To Fix [2022]
• Do Vizio TVs Have a Reset Button? Answered