USING YOUR REFRIGERATOR
SETTING THE CONTROLS
1^1
oozor
Temp
Zit t
t ° v
i Refrigerator '
i
Temp
Energy
Saver
Ultra Icc
Door
Alarm
-'HWO'tiBC»
Temperature
• Your refrigerator has a digital control panel above
the refrigerator compartment that lets you regulate
the temperature in the freezer and refrigerator
compartments.
• The refrigerator control is preset at 37°F (3°C) and
the freezer control is preset at 0°F (-18°C). These
are the recommended temperatures settings for
normal use and conditions. Wait 24 hours for the
refrigerator and freezer to reach these
temperatures.
• Refrigerator Temp Control: 33°F to 46°F
(1°C to 8°C)
The lower the number setting, the colder the
refrigerator compartment will become.
• Freezer Temp Control; -6°F to 8°F
(-21 °C to -13°C)
The lower the number setting, the colder the
freezer compartment will become.
NOTE:
When changing control settings, wait 24
hours before making additional adjustments. After 24
hours, adjust the compartment
temperatures as
desired.
Energy Saver
• Press and hold the
button for at least
3 seconds to activate or deactivate the function.
• This function deactivates heaters used to reduce
excess exterior moisture and is recommended for
increased energy savings.
• The energy saving function is also recommended
for periods of time when the doors will not be
opened, such as vacations.
Door Alarm
• When power is connected to the refrigerator, the
door alarm is initially set to |
] (ON) and the
indjcator above the door alarm button will light up
tj
I
d
(ON).
' When either the refrigerator or the freezer door is
left open for more than 60 seconds, the alarm tone
will sound to let you know the door is open.
' When you close the door, the door alarm will stop.
' If you want to disable the door alarm function,
press the
door alarm button will turn (TjE3) off.
button and the indicator above the
Ultra Ice
• When you press the_Ultra Ice button, the indicator
above the button T
Ultra Ice
i will light up in the display
and will remain on for 24 hours. It will automatically
shut off after 24 hours have passed.
You can stop this function manually by pressing the
button one more time.
• This function increases both icemaking and
freezing capabilities.
Temperature Mode (°F <->°C)
• If you want to convert °F to °C or vice versa, press
and hold the fWl and the RiS buttons
jSeirigefaforj
simultaneously for 5 seconds or more.
A
CAUTION
Demo Mode (Store showroom floor Demostratlon
Mode)
The Demo Mode disables all cooling in the refrigerator
and freezer sections to conserve enegy while on
display in
a retail store.
1. To activate:
With the refrigerator door opened, press and hold
the pS^ and
buttons at the same time for
5 seconds. The control panel will beep to confirm
that the Demo Mode is activated.
2. To deactivate:
With the refrigerator door opened, press and hold
the and
buttons at the same time for
5 seconds. The control panel will beep to confirm
that the Demo Mode is deactivated.
18
Setting
the
Controls
Freezer
Temperature
FREEZER
TEMPERATURE
OFF
Freezer
Control
The controls are located on the upper
back wall of the refrigerator compart-
ment. The Freezer Control is the main
control. If it is turned OFF, neither the
Freezer nor the Refrigerator will cool. All
of the electrical circuits remain ener-
gized except for the compressor and
fan motors. The control has settings,
from "1" (the warmest) to "4" (the cold-
est). Start by setting the dial on "2V2".
Load food in freezer. Allow 24 hours for
the freezer to cool after the unit is
installed, before checking food tempera-
tures.
Check Food temperature as instructed
on page 12. Adjust the control as
needed, one number at a time. The
best temperature for frozen food storage
is in the 0 ° to + 2 ° F range.
Refrigerator
Temperature
FRESH
FOOD
TEMPERATURE
LDER
Thermostatic
Refrigerator
Control
This control, operates independently
of
the freezer control. A hidden thermosta-
tic sensor measures
refrigerator
air tem-
perature constantly, and automatically
lets in more cold air if temperature rises
as little as 1 1/2° F from your setting.
The control has settings, from "1" (the
warmest) to "4" (the coldest). The best
food storage temperature is in the 38 °
to 40 ° F range. Start by setting the dial
on 2V2.Load food in the refrigerator.
Place a glass of water in the middle of
the refrigerator section, making sure
that air can flow around it. (This will be
used later to check food temperature.)
After the unit is installed, allow 24 hours
for the refrigerator to cool. Check food
temperature as instructed on the next
page. Adjust the control as needed,
one number at a time.
11