How many quarts of transmission fluid does a 4l60e hold

including tranny lines radiator cooler and stock GM external cooler?

thanks!

Mr. 960

What year, make and model. I have that info but need the info to do the lookup and don't want to give inaccurate information.

Btw-Don't know of any info source that gives the cooler and line capacity, probably 1-3 qts more or less.

What year, make and model. I have that info but need the info to do the lookup and don't want to give inaccurate information.

Btw-Don't know of any info source that gives the cooler and line capacity, probably 1-3 qts more or less.

thanks - it's a 2003 GMC YUKON 2 wheel drive 4.8lt.

Mr. 960

Here is the info I have.......

Allow an extra 1-3 qts for the cooler and lines. From prior experience, about 15 qts should be enough BUT depending on who is doing the work (pro or amateur), it could be less and it could be more. Flushing the trans is not a precise operation, spillage can and often does occur so be prepared with enough fluid. Good luck.

If you want to verify, try this link.... APPLICATION LOOKUP GUIDE

There are links here to ATF change procedures you might find informative.

2003 GMC TRUCKS YUKON 4.8L 8-cyl Engine Code V
CAPACITIES
Engine, with filter..........6.0 quarts
Cooling System, W/ Front AC Initial Fill..........14.0 quarts
Cooling System, W/ Front and Rear AC Initial Fill..........16.0 quarts
Automatic Transmission, 4L60E Initial Fill..........5.0 quarts[1]<----This is the amount if you just drop the pan
Automatic Transmission, 4L80E Initial Fill..........7.7 quarts[1]
Automatic Transmission, Total Fill
4 speed 4L60E..........11.0 quarts
4 speed 4L80E..........14.0 quarts
Differential, with 10.5 ring gear EX Dana Rear..........6.3 pints
Differential, with 12 ring gear Rockwell Rear..........14.0 pints
Differential, with 9.75 ring gear Rear..........5.5 pints
Differential, Front..........3.6 pints
Differential, with 8.5, 8-5/8 ring gear Rear..........4.2 pints
Differential, with 10.5 ring gear Dana Rear..........5.5 pints
Differential, with 9.5 ring gear Rear..........5.5 pints
Transfer Case,NVG236, NVG246..........4.0 pints
Transfer Case,NVG261, NVG263..........4.0 pints
Transfer Case,NVG149..........4.4 pints

1. With the ENG at operating TEMP, shift TRANS
through all gears. Let ENG slow idle in PARK for at
least 3 minutes. Check fluid level and add fluid as needed.
Do not overfill.

well..i bought 3 gallons when i installed mine..have a small amount left from the 3rd gallon so approx. 11 quarts:imo

thanks for the detailed responce!

Mr. 960