Overriding Schedules: Residential Show Use 1. Touch or to adjust the temperature (right side of screen) and the Hold Until time (left side). The schedule will resume when the Hold Until time expires. Temporary Hold 2. Select Permanent Hold to keep the same temperature until you change it or resume the program schedule. Touch Cancel Hold at any time to resume the program schedule. Overriding Schedules: Commercial Use Touch or to adjust the temperature. It will be maintained until the hold time you set. • To change the hold time, touch the Hold Until arrow buttons. This time can be adjusted up to the maximum time set by the installer. • Touch Override to use a pre-set occupied temperature if a person uses the room during an unoccupied period. The new temperature will be maintained for 1 hour and can be adjusted up to the maximum time set by the installer. MCR34103 Fig. 92. MCR34169 Fig. 93. The programmed schedule will resume when the override timer expires. Touch Cancel Hold at any time to resume the program schedule. Viewing Equipment Status 1. Touch MENU. 2. Select Equipment Status. Equipment Status Date/Time 3. Touch or to view the status of all the equipment your thermostat is controlling. Depending on how your thermostat was installed, the Equipment Status screen can report data about the following systems: • Heating and cooling • Fan • Humidification • Dehumidification • Ventilation • Maintenance reminders • Thermostat information Heat Stage 1: Off Cool Stage 1: On 63 ® VISIONPRO 8000 WITH REDLINK™ MCR34106 Fig. 94. MCR34100 Fig. 95. MCR34108 Fig. 96. MCR34109 Fig. 97. 68-0312—03
Som I spend each darn end of the week taking a shot at home tasks and trimming down the “nectar do” list. This is where I share the majority of the undertakings I’ve done and things I’m learning. Recent Posts
How to Change the Owner of Your Nest Thermostat? Thanks to the digital age, we can have complex things and mundane life simplified using smart home technologies. One such amazing product is the Nest Thermostat that will allow you as a user to...
Does Echo Dot Have to Be Plugged In? As the original Amazon Echo was a success, they’ve released numerous Echo smart speakers with different modifications and even more interesting features. For example, The Echo Dot provides users... You can put your Honeywell T6 Z-Wave Thermostat in hold mode by choosing the desired temperature for the hold and then either setting the time for a temporary hold or setting a permanent hold. Please note that a hold can only be set if a temperature schedule for the T6 has been established.  When a schedule has been set up for a Honeywell Thermostat, the device will follow that schedule and adjust the temperature for the HVAC system accordingly. A hold tells the thermostat to ignore this schedule and instead keep the temperature held at a set level. By using the T6 Thermostat, a user can set a Temporary Hold (less than 12 hours, or until cancelled) or a Permanent Hold (indefinitely until cancelled). There is also a third type of hold called Vacation Hold, but this is only accessible through the Honeywell Home App. It is only possible to set a hold if a schedule for the T6 Thermostat has been created. Without a schedule, there would be no scheduled temperature setting for the thermostat to resume when the hold has ended. So setting a hold without a scheduled temperature would just be the same as adjusting the temperature.Once the T6 is taken out of hold mode, the device will resume its regularly scheduled settings. Note: If you pair the T6 Thermostat with a system that uses an interactive automation platform like TC2 or ADC, then you will no longer be able to set permanent holds locally at the thermostat. Complete the following steps to put a Honeywell T6 Z-Wave Thermostat into hold mode and then take it out of hold mode: 1. Set the hold temperature. Adjust the temperature by using + and - keys, and stop when you reach the temperature that you want to use with the hold. The message "Hold Until" will appear. This indicates that the T6 is now in hold mode. 2. Adjust the hold period. Underneath the Hold Until message, a time will be displayed. This displayed time is when the temporary hold is scheduled to end. Press the Hold Until message, and the displayed time will start to blink. This means that you can now adjust the hold time. Adjust the hold time using the + and - keys. Press the Hold Until message to confirm the time. The displayed time will stop blinking, meaning that the hold time has been set. To set a permanent hold, press the Hold Until message. To the left, a Permanent Hold button will appear. Press the Permanent Hold option. The hold adjustment screen will be exited, and the "Permanent Hold" message will remain on the screen. This indicates that the T6 is now in a permanent hold.
Did you find this answer useful?We offer alarm monitoring as low as $10 / monthClick Here to Learn More Related ProductsAnswered September 19, 2018 What is permanent hold on Honeywell Thermostat?The temporary hold setting is when you change the temperature setting to a different temperature and it stays at that setting until the next schedule change. The permanent hold setting holds the temperature setting you have chosen for an indefinite time. This overrides your scheduled settings.
How long does hold last on Honeywell Thermostat?A temporary hold will keep the HVAC system set to the held temperature for a temporary period of time of less than 12 hours or until the hold is cancelled. A permanent hold will keep the HVAC system set to the held temperature permanently, until the hold is cancelled.
How do I turn off temporary hold on Honeywell Thermostat?Depending on the Honeywell Thermostat model you have, tap on the Run/Cancel/Run Schedule/Use Schedule/Remove Hold or Cancel Hold option to turn off Temporary Hold on Honeywell Thermostat.
|
Honeywell thermostat how to set permanent hold
Related Posts
Copyright © 2024 toptenid.com Inc.
