Firex hardwired smoke detector with ionization and photoelectric dual sensors

Kidde Firex Hardwired Smoke Detector with Ionization and Photoelectric Dual Sensors

Log in for product availability.

Firex hardwired smoke detector with ionization and photoelectric dual sensors

Product Overview

The Kidde PI2010 is a 120-Volt AC, wire-in smoke alarm with 9-Volt battery backup. This smoke alarm functions as a stand-alone unit or in an interconnected system. The Kidde PI2010 features Hush, allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a quick connect power harness that allows for quick and easy installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.

  • Interconnect interconnects with up to 24 Kidde devices on one wiring network of which 18 can be initiating
  • Ionization sensor may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms
  • Photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
  • Battery backup (9-Volt battery included) provides continuous protection even during power outages
  • Tamper resistant deters from tampering or theft
  • Hush feature temporarily silences nuisance alarms
  • Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
  • Smoke detector utilizes ionization and photoelectric sensors to detect fire hazards and sounds an 85 db alarm when a hazard is detected

Documentation

Specifications

Alarm Sensor Type

Dual-Sensor

Certifications and Listings

UL Listed

Features

Battery Back-Up, Hush Feature, Interconnected

Product Height (in.)

5.75

Antigua and Barbuda, Aruba, Australia, Austria, Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize, Bermuda, Bolivia, Brunei Darussalam, Bulgaria, Cambodia, Canada, Cayman Islands, Chile, China, Colombia, Costa Rica, Croatia, Republic of, Cyprus, Czech Republic, Denmark, Dominica, Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana, Germany, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guernsey, Honduras, Hong Kong, Hungary, Iceland, Indonesia, Ireland, Israel, Italy, Jamaica, Japan, Jersey, Jordan, Korea, South, Kuwait, Latvia, Liechtenstein, Lithuania, Luxembourg, Macau, Malaysia, Maldives, Malta, Martinique, Mexico, Monaco, Montserrat, Netherlands, New Zealand, Nicaragua, Norway, Oman, Pakistan, Panama, Paraguay, Peru, Philippines, Poland, Portugal, Qatar, Reunion, Romania, Saint Kitts-Nevis, Saint Lucia, Saudi Arabia, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Thailand, Trinidad and Tobago, Turks and Caicos Islands, United Arab Emirates, United Kingdom, United States, Uruguay, Vietnam

Kidde Firex Hardwired Smoke Detector with Ionization and Photoelectric Dual Sensors

Log in for product availability.

Product Overview

The Kidde PI2010 is a 120-Volt AC, wire-in smoke alarm with 9-Volt battery backup. This smoke alarm functions as a stand-alone unit or in an interconnected system. The Kidde PI2010 features Hush, allowing you to quickly silence nuisance alarms and also includes a tamper resist features that deters tampering and theft. The PI2010 includes a quick connect power harness that allows for quick and easy installation. This smoke alarm combines both photoelectric and ionization sensors. Ionization sensing alarms may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms. Photoelectric sensing alarms may detect visible particles (associated with smoldering fires) sooner than ionization alarms.

  • Interconnect interconnects with up to 24 Kidde devices on one wiring network of which 18 can be initiating
  • Ionization sensor may detect invisible fire particles (associated with flaming fires) sooner than photoelectric alarms
  • Photoelectric sensor may detect visible particles (associated with smoldering fires) sooner than ionization alarms
  • Battery backup (9-Volt battery included) provides continuous protection even during power outages
  • Tamper resistant deters from tampering or theft
  • Hush feature temporarily silences nuisance alarms
  • Check with your state and local fire and building/safety codes for specific information regarding smoke and carbon monoxide alarms
  • Smoke detector utilizes ionization and photoelectric sensors to detect fire hazards and sounds an 85 db alarm when a hazard is detected

Documentation

Specifications

Alarm Sensor Type

Dual-Sensor

Certifications and Listings

UL Listed

Features

Battery Back-Up, Hush Feature, Interconnected

Product Height (in.)

5.75

Are photoelectric or ionization smoke detectors better?

It has been established and well known for many years that: Ionization smoke alarms tend to respond faster to the smoke produced by flaming fires than photoelectric smoke alarms. Photoelectric smoke alarms tend to respond faster to the smoke produced by smoldering fires than ionization smoke alarms.

What is the lifespan of a Firex smoke detector?

Smoke and carbon monoxide alarms must be replaced within the specific lifetime of the product, usually 5 to 10 years after the date of manufacture. Learn how to easily replace your old Firex alarms.

What is the difference between Firex i4618 and I4618AC?

The differences in the I4618A and the I4618AC are technical differences in the electronic parts in the alarms. The two alarms are completely compatible and equivalents to each other and function similarly and have same patterns of beeps and LED flashes.

Is Kidde the same as Firex?

Kidde acquired the manufacturer of Firex branded products in 2009 - Invensys Controls no longer manufactures or supports these products.