$94.95 $94.95 $94.95 Price when purchased online Free shipping, arrives by Wed, Oct 5 to Want it faster? to see options Sold and shipped by Go-Parts | Parts Dynasty Corporation 189 seller reviews Free 30-day returns What is an ignition lock cylinder?The ignition lock cylinder and ignition switch are two separate components. The lock cylinder is the portion that the key slides into and allows the ignition to turn. This is one of your vehicle's defenses against theft. How does the ignition lock cylinder work?If the correct key is inserted, small actuators on the lock cylinder will allow it and ignition switch to rotate. What are the symptoms related to a bad ignition lock cylinder?When the ignition switch lock cylinder fails, it can create a situation where the ignition cannot be turned, or takes much wiggling and shaking before it finally turns. Or, it's possible the ignition will turn and run with the key removed, or lets the key be removed in any position. Lastly, the lock can fail to release your key, or not allow the key to travel all the way into the ignition lock cylinder. Can I drive with an ignition lock cylinder problem?When the ignition lock cylinder is malfunctioning, it may be impossible to insert the key, turn the ignition, or remove the key from the ignition. If the key won't go in or turn, you won't be able to drive the car, obviously. If the key won't come out, theft is a major concern. Either way, you'll want this fixed quickly. How often do ignition lock cylinders need to be replaced?Theres no set maintenance routine for the ignition lock cylinder. Lock cylinders fail somewhat commonly, but mostly for higher-mileage vehicles. Most vehicles will never need the lock cylinder replaced. You can help yours last by cleaning your ignition key, making sure there's no lint on it before putting it in the ignition, and keeping your keychain fairly light, so as not to put added pressure on the cylinder while you drive. Does a 2004 Jeep Grand Cherokee key have a chip?Jeep Grand Cherokees from the years 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 and 2017 have the transponder, (chip key), and these keys need to be programmed to your Jeep's immobilizer.
Can I change the ignition cylinder without the key?Take your screwdriver and insert it into the ignition lock cylinder. Turn it as far round in a clockwise direction that you can. Then pull the paperclip to the right as much as you can. You should then be able to slide the switch out easily.
How do I remove the ignition lock cylinder without a Jeep Cherokee?Use a flathead screwdriver to try to turn the lock. If you can't turn it, drill through it with the power drill. Depress the ignition catch with a thinner Torx screwdriver, and pull out the cylinder.
|
2004 jeep grand cherokee ignition lock cylinder replacement
Related Posts
Copyright © 2024 toptenid.com Inc.
