First alert smoke alarm still beeping after battery change

• Smoke detectors beep when the batteries need changing.
• They may also beep when they're malfunctioning and need to be replaced.
• Smoke detectors are sensitive to smoke and extreme temperatures, and either may cause beeping.

Smoke detectors can help save lives, and the National Fire Protection Association (NFPA) recommends installing them in every bedroom and on every level in a home. It's best to install them either on the ceiling or high up on the wall to reduce false alarms.

The NFPA also reports that three out of five fire deaths occur because there either aren't any smoke alarms in a home, or those smoke alarms don't work. If your smoke detector is beeping and not working properly, it's important to diagnose the problem and fix it immediately to continue protecting yourself and your family members.

What loud and fast beeping means

There's a fire: Loud and fast beeping is the universal indicator that you have a potential fire. Even though you may not see or smell anything, don't rule that out. It's worth taking a look around your home to ensure that this is indeed a false alarm.

A false alarm: The beeping could also be happening because of heat, someone smoking tobacco products, or if you're cooking something that is producing a lot of smoke. To avoid false alarms in the kitchen, the smoke detector should be at least 10 feet away from any cooking appliance, according to the NFPA.  

End of device life: The smoke detector could also be nearing the end of its life, says Mark Dawson, chief operating officer of Mister Sparky. "One loud chirp per minute for five minutes (five chirps in five minutes, is the typical end-of-life warning for most smoke detectors, and the only solution is to replace it with a new alarm as soon as possible." He advises double-checking the device's warranty with the manufacturer before purchasing a new one.

If it's under warranty, you can get a replacement at no charge if the smoke detector is defective. "A temporary fix to hush your device while on the hunt for a new one is to press and hold the test/silence button located on the back of your device," Dawson says. However, the warning noise will resume after two days and you won't be able to temporarily silence it after two weeks. Admittedly, for safety reasons, you shouldn't wait two weeks to get it replaced.

What consistent and spaced-out chirps mean

Device malfunction: If you consistently get 3 chirps, or if the smoke detector is flashing red and chirps at 30-second intervals, Dawson says it could be the device is malfunctioning because it's expired and in need of replacement as soon as possible. If it is still under warranty, you can return the device to the manufacturer for a new one. 

Battery malfunction: The malfunction could also be with the batteries. Dawson recommends holding the test button for a couple of seconds. The exact location may vary by manufacturer, but there should be a button on the front of the device that is clearly labeled "test." This should produce a loud alarm sound. If it doesn't, you may need to replace the batteries to see if this solves the problem. 

If replacing the batteries doesn't work, replace the smoke detector. While the life span may vary depending on the manufacturer, smoke detectors typically last eight to 10 years.

What irregular and erratic beeps mean

Battery issues: "One chirp per minute could indicate that your alarm has a low-battery or other battery-related issues," Dawson says. "Other causes of irregular beeping include batteries facing the wrong way, battery pull-tabs still in place, or the battery drawer [is] partially open."

To settle this issue, Dawson recommends checking the batteries to see which way they are positioned and to ensure they're in correctly. If the batteries are dead, simply replace them with new ones to stop the chirping. Generally you should change your smoke detector batteries twice a year. One way to make it easy to remember when to change or check your batteries: the NFPA recommends that you check your batteries when you change your clocks for daylight savings time.

Temperature/humidity: Sometimes your smoke detector could be chirping erratically because of temperature or airflow problems, says Bruce Foster, co-owner of Mr. Handyman of Western Wake County in Raleigh, NC. "You could also have it placed too close to an open window, HVAC register, or even your ceiling fan," Foster says. If these, or any other conditions are causing it to be too cold or too hot, the smoke detector is going to act up and you should move it to another location.  

Residual charge: If your device continues beeping after you replace the batteries, Dawson says you may need to clean the residual charge. The residual charge is what allows the beeping to continue even after the battery has died and been replaced — and if this is what's happening, you'll need to reset the smoke detector.

To do this, first remove the alarm and open the cover where the batteries are held. Then press and hold the test button for 15 to 30 seconds to drain the charge and reset the device. Clean the battery compartment with a microfiber cloth before reinserting the batteries. Press the test button again, and once you hear a loud beep, your device is ready to go. If you don't hear a beep, you may need to replace the smoke detector entirely.  

Insider's takeaway

Never ignore a smoke detector when it is chirping. The device may be faulty, or the batteries may need to be changed. It's also possible that the smoke detector is reacting to environmental conditions, such as smoke and extreme temperatures. Regardless of the cause, always troubleshoot immediately to ensure your home is always covered in the event of a fire.

When she's not writing about business trends for The Economist, or legal trends for the American Bar Association Journal, Terri spends her time covering trends in buying and selling homes, mortgages, home improvement, and home products. She has bylines at Realtor.com, Bob Vila, Apartment Therapy, The Spruce, Real Simple, Real Homes, Yahoo, The Daily Beast, Investopedia — and several other companies that you've probably heard of. 

Read more Read less

Why does my smoke detector keep beeping even after I change the battery?

How do you reset First Alert smoke alarm after changing battery?